株式会社STS

Rotating Laser Level

Rotary Laser Level with Slope Setting Function 　SLH-600

Gradient on 2 Axes can be Set Directly!

【Standard Accessories】

・Remote Controller・Detector・Rechargebale Battery・Recharger・Flat Head Tripod・Hard Case・Clamp of Detector・Slight Movement Rotating Plate・8° Slope Plate ・Finder Scope・D dry cell battery x3pcs ・AA dry cell battery x 2pcs ・9V dry cell battery x 1 pc

  • A Wide Range of Slope Settings is Possible even in Construction Sites with Steep Slopes.

    A Wide Range of Slope Settings is Possible even in Construction Sites with Steep Slopes.

    X axis　-10％ to+10％ /Y axis　-1％to+12％ Setting is Possible

  • Slope Setting Mode

    Slope Setting Mode

    If you use the included slope plate, you can set a slope of up to 25% using only Y-axis.

  • Using with Machine Controller Increases Work Efficiency

    Using with Machine Controller Increases Work Efficiency

    By using STS machine controller, it is useful for construction management for heavy machinery.

  • Laser Irradiation Cutoff Function

    Laser Irradiation Cutoff Function

    You can block laser irradiation to areas other than where you are working. This will not cause any inconvenience to other contractors on site. Easy operation, just press the button on the remote control or main panel in the direction you do not want to irradiate.

  • Complete Automatic Leveling

    Complete Automatic Leveling

    Neither spirit level nor leveling screw is necessary! Just put it down and turn on the power. Levels automatically within a range of ±8°.

  • Anti-Vibration Mode

    Anti-Vibration Mode

    This Anti-Vibration function makes the device keep leveling continuously without stopping rotation every time it feels slight vibration.

  • About 600m in Diameter

    Using included detector, operating area will be widened to about 600m in diameter.

  • Safety Mode

  • 2 Way Power Supply

SPECIFICATIONS

SLH-600
Laser Source
635nm Red Semi-Conductor Laser
Laser Output
2mW or less, Class 3R（JIS C6802:2014）
Accuracy
Horizontal:±10"（±0.5mm/10m）
Slope:-5% to +5%:±0.1mm/1m Others:±0.2mm/1m
Automatci Leveling Range
±8°（About ±14%）
Measurement Range
About 600m in diameter（When using included detector SS-600）
Rotating Speed
2 steps at 1100rpm and 600rpm
Power Supply
Alkaline D dry cell battery ×3 pcs
BTSL600 Rechargeable Li-ion battery
Recharging Hours :About 12 hours
Continuous Operating Hours
About 35 hours（Alkaline battery）About 28 hours（Rechargeable battery BTSL600）
Battery Life Warning
YES
Operating Temperature Range
-10℃ to +45℃
Out of Compensation Range Warning 
YES  Stop Rotation, Buzzer Sound, Laser Blinking
Safety Mode
YES  Blinking of Safety Mode Display(quick blinking) Stop Rotation, Laser Blinking
Size/Weight
235×180×248mm 3.4kg（Without Batteries）
Water and Dustproof
YES  Equivalent to IP56
 
Detector SS-600
Display
LCD (both sides) and Buzzer sound (Volume selectable: Big, Small, No sound)
Noise-canceling Function
Detecting Distance
About 300m in radius　(Max. about 600m in diameter)
Detecting Accuracy
High　±0.5mm
Middle　±1.0mm
Low　±2.5mm
Power Supply
S-006P(6F22) Layered Dry Cell Battery(9V)×1ps
Continuous Operating Hours
About 36 hours
Operating Temperature Range
-10℃ to +45℃
Battery Life Warning
YES
Spirit Level
YES(Vertical & Horizontal, 2 places)
Illuminating Device
YES
Water and Dustproof
YES Equivalent to IP56
Automatic Power OFF
YES　About 6 min. after the last operation and detection
Size/ Weight
159×82×28mm　/　0.25kg（Without Batteries）
 
Remote Controller RC-24
Channel Number
15ch
Frequency
2.4GHz Interactive
Output
1mW or less
Power Supply
AA dry cell battery×2pcs
Continuous Operating Hours
About 40 hours
Water and Dustproof
Yes  Equivalent to IP56
Size/ Weight
148×78×28mm　0.15kg（Without Batteries）
*Wireless Telegraph Law　2.4GHz area energy saving data communication system. Respond to the second article first clause No.19
 
Back to Products List