Measuring Instruments
Metal Depth Display！ Distinguish Between Magnetic and Non-Magnetic Metals
【Standard Accessories】
・9V dry battery x 1 pc・Original soft case
-
Metal Depth Display
This device detects the presence or absence of detection components. It cannot detect up to the width of the detection member.
-
Distinguish Between Magnetic and Non-Magnetic Metals
It is not a detector that detects any wall member.
-
Easily Detect the Center of Parts
Just place it against the wall and slide it left and right to detect metal or wood inside the wall.
-
Wall Mounting
-
Installing Handrails
-
Installing Curtain Rails
SPECIFICATIONS
WBS-8652
Maximum detection depth※
Magnetized metal: approx. 8cm, live wire: approx. 5cm, non-magnetic metal: approx. 6cm, wood: approx. 2cm
※This is not a detector that detects any wall members.
※Measurement results vary depending on the detection mode, the material and size of the detected object, and the material and condition of the detection surface. Wires that are not energized may display a weak signal.
※This is not a detector that detects any wall members.
※Measurement results vary depending on the detection mode, the material and size of the detected object, and the material and condition of the detection surface. Wires that are not energized may display a weak signal.
Operating temperature range
-10℃ to +50℃
Storage temperature range
-20℃ to +70℃
Power supply
9V dry battery x1
Auto power OFF
Yes Approximately 5 minutes after no detection or after last operation
Continuous use time
Approximately 6 hours
Size/Weight
146×26×68mm / 167g(including battery)